Basis of Issue Plan - BOIP
A. DESCRIPTION: THE ALL SOURCE ANALYSIS SYSTEM (ASAS):
AN/TYQ-89/LIN Z05038 IS COMMONLY REFERRED TO AS THE DIVISION
ACE (ANALYSIS AND CONTROL ELEMENT). IT IS PART OF THE "DIV SET"
(SEE A.3. BELOW) OF ASAS BLOCK II EQUIPMENT, WHICH CONSISTS OF
2 PRIMARY SUBSYSTEMS--THIS DIV ACE AND THE COMMUNICATIONS
CONTROL SET (CCS): AN/TYQ-40A(V)2/Z43301 (W/O RADIO), AND A
SECONDARY SUBSYSTEM--REMOTE WORKSTATIONS (RWS): AN/TYQ-93/Z72392.
1. THE DIV ACE CONSISTS OF 14 WORKSTATIONS CONSISTING OF
BASELINED COMMON HARDWARE AND SOFTWARE (CHS) COMPONENTS WORK AT
THE TOP SECRET SENSITIVE COMPARTMENTED INFORMATION (TS-SCI) LEVEL
AND PROVIDE AUTOMATED DATA PROCESSING IN THE DIV ACE. WORK-
STATIONS DIFFER IN SOFTWARE FUNCTIONALITY; EACH WORKSTATION HAS
A 19" DIAGONAL SUPER HIGH RESOLUTION COLOR GRAPHICS DISPLAY,
MASS STORAGE DEVICE(S), KEYBOARD, POINTING DEVICE, AND ACCESSES
A PRINTER.
NON-LIN COMPONENTS:
NSN/PN QTY/ NOMENCLATURE
RATIO
---------------------------------------------------------------
V2U2S2000HCX3C 14:1 CHS2 ULTRA2 COMPUTER UNIT (UCU-2)
7025-01-421-7664 14:1 CHS2 19" COLOR MONITOR DEVICE
7025-01-444-9625 36:1 CHS2 9GB REMOVEABLE HARD DISK DRIVE
6130-01-421-7678 8:1 CHS2 UNINTERRUPTIBLE POWER SUPPLY (UPS)
02-2757027-1 4:1 CHS V2 MASS STORAGE EXPANSION UNIT-2 (MSEU-2)
11-2757020-1 4:1 CHS2 COLOR PRINTER
02-2757124-1* 3:1 LARGE SCREEN DISPLAY (CHS-2)
02-2755928-1 8:1 CHS V2 16" COLOR FLAT PANEL DISPLAY
02-2758672-1 6:1 CHS V1/V2 2.6-GB MAGNETO-OPTIONAL DISK DRIVE
02-2757037-1 14:1 CHS V1/V2 600-MB 15X CD-ROM DRIVE
02-2757252-1 6:1 CHS V1/V2 40-GB 8MM MAMMOTH TAPE DRIVE
2514 4:1 CISCO (10/100 MBPS ETHERNET) SWITCH
02-2757218-1 14:1 VOICE COMMUNICATIONS EQUIPMENT HEADSETS
99-2757054-18 14:1 OPERATIONAL CASE - V2 HCU/UCU
99-2757054-19 14:1 OPERATIONAL CASE - V2 19" CMD
99-2757054-33 18:1 TRANSIT CASE, V2 RHDD
99-2757054-22 8:1 OPERATIONAL CASE, V2 UPS
99-2757054-9 4:1 TRANSIT CASE, MSEU-2
5895-01-446-8579 4:1 TRANSIT CASE, V2 RCP
99-2757054-26* 3:1 TRANSIT CASE, V1 LARGE SCREEN DISPLAY
99-2757054-34 14:1 LEVELING/STORAGE CASE
TBD 4:1 TRANSIT CASE - LAN SWITCH
*PLACEHOLDER-AWAITING CHS UPDATED VERSION.
2. PHYSICAL CHARACTERISTICS FOR EACH OF THE 14 WORKSTATIONS:
LENGTH= 22.4 IN/WIDTH= 19 IN/HEIGHT= 22.6 IN/CUBE= 5.2 CU FT/WEIGHT=
125 LBS.
a. DOES NOT INCLUDE AN UNINTERUPTIBLE POWER SUPPLY (UPS)
(16"L x 16"W x 6"H AND 78 LBS)), COLOR RASTER PRINTER
(L 37", W 32", H 23.75", 150 LBS) AND FLAT PANEL DISPLAY
(17.5"L x 5"W x 15.75"H and 25 LBS)
b. PHYSICAL CHARACTERISTICS FOR TRANSPORT OF DEVICES WITHIN
TRANSIT CASES: HIGH CAPACITY UNIT/ULTRA CAPACITY UNIT (HCU/UCU)
25" X 28" X 24", 139 LBS, MONITOR 25.11" X 28" X 26.24" 142
LBS, MASS STORAGE EXPANSION UNIT (MSEU) 23.77" X 30.7" X 33.0".
129LBS, UPS 25.11" X 28.0" X 15.74", 146LBS, LEVELING/STORAGE
CASE W/FLAT PANEL DISPLAY 25.32" X 19.3" X 10.0" 45 LBS
(ESTIMATED), COLOR PRINTER 37.0" X 32.0" X 23.75" 150LBS,
LARGE SCREEN DISPLAY (LSD) DIMENSIONS: 37"L, 25"W, 20.25"H,
WT 80 LBS. A COMPLETE DIVISION ACE ASAS WORKSTATION SUITE (14
WORKSTATIONS PLUS PERIPHERALS) CONSISTS OF 59 TRANSIT CASES
WHICH OCCUPIES 507 CU FT (not including the 3 Large Screen
Displays) FOR A TOTAL WEIGHT OF 6560 LBS
c. STORAGE TEMP SHOULD NOT BE LESS THAN -25F NOR MORE THAN
+150F.
d. NON-OPERATING ALTITUDE UP TO 40,000 FEET.
3. ASAS BLOCK II EQUIPMENT IS IDENTIFIED IN "ECHELON SETS"
(I.E. EAC SET, CORPS SET, DIV SET, ACR/SEP BDE SET) & AND MAY
BE COMPRISED OF VARYING TYPES OF:
-> (1 OF 4 TYPES) ANALYSIS & CONTROL ELEMENT W/WORKSTATIONS-
@ DIV:AN/TYQ-89/Z05038 W/14 WORKSTATIONS;
@ CORPS: AN/TYQ-92/Z07557 W/24 WORKSTATIONS;
@ EAC: AN/TYQ-91/Z05106 W/24 WORKSTATIONS;
@ ACR/SEP BDE AN/TYQ-90/Z04970 W/8 WORKSTATIONS.
-> (1 OF 4 TYPES) COMMUNICATIONS CONTROL SET-
@ DIV: AN/TYQ-40A(V)2/Z43301 (W/RADIO);
@ CORPS: AN/TYQ-40A(V)3/Z43233/W/O RADIO;
@ EAC: COMPARTMENTED ASAS MESSAGE PROCESSING SET
(CAMPS) W/RADIOS, AN/TYQ-63A(V)1/Z43165;
@ ACR/SEP BDE: COMPARTMENTED ASAS MESSAGE PROCESSING SET
(CAMPS) W/RADIOS, AN/TYQ-63A(V)3/Z43029.
-> WORKSTATION COMPUTER GRAPHICS(WCG): AN/TYQ-93/Z72392
(REMOTE WORKSTATION (RWS))
ALL ASAS ITEMS (FOR DIV, CORPS, EAC, ACR/SEP BDE) ARE
ASSIGNED BOIP NUMBERS WITHIN THE M095 ICP.
4. THE TRUCKS, TRAILERS, AND GENERATORS ARE REQUIRED TO TRANS-
PORT AND POWER THE WORKSTATION MODULES AND OTHER ASSOCIATED
SUPPORT ITEMS OF EQUIPMENT (ASIOE) WHEN DEPLOYED.
B. CAPABILITIES:
1. THE PURPOSE OF ASAS IS TO FUSE INTELLIGENCE FROM VARIOUS
SOURCES TO DEVELOP THE COLLATERAL COMMON RELEVANT ENEMY PICTURE
OF THE BATTLEFIELD. EACH WORKSTATION USES THE BASELINED ASAS
BLOCK II SOFTWARE THAT PROVIDES INTEGRATED ALL SOURCE (AS) AND
SINGLE SOURCE (SS) FUNCTIONALITY.
a. WORKSTATIONS PERFORMING ALL SOURCE (AS) FUNCTIONS
PROVIDE A SEMI-AUTOMATED INTELLIGENCE ANALYSIS, PRODUCTION, AND
DISSEMINATION CAPABILITY TO THE ACE. THE AS WORKSTATION WILL HAVE
THREE HIGH-LEVEL CATEGORIES OF FUNCTIONALITY: SYSTEMS SERVICES
SUPPORT, COMMUNICATIONS SUPPORT, AND INTELLIGENCE APPLICATIONS.
THE SUPPORTING SOFTWARE WILL BE ORGANIZED INTO THREE MODULES:
SYSTEM SOFTWARE MODULE (SSM); COMMUNICATIONS SOFTWARE MODULE
(CSM); AND APPLICATIONS SOFTWARE MODULE (ASM). EACH OF THESE
MODULES WILL BE DIVIDED INTO COMPUTER SOFTWARE CONFIGURATION
ITEMS (CSCI) WHICH WILL PERMIT THE SIMULTANEOUS PROCESSING OF
BOTH INTERACTIVE AND AUTOMATIC INTELLIGENCE ANALYSIS ACTIVITIES.
THE INTERACTIVE FUNCTIONS REQUIRE THE JUDGEMENT AND/OR EXPERT
KNOWLEDGE OF AN ANALYST OR SUPERVISOR. AUTOMATIC PROCESSING
FUNCTIONS WHICH ARE FACTORY-SET OR SYSTEM-SUPVSR-SET WILL BE
TRANSPARENT TO THE ANALYST.
b. WORKSTATIONS PERFORMING SS FUNCTIONS PROVIDE SINGLE
SOURCE ANALYSIS AND PROCESSING CAPABILITY. FUNCTIONALITY
INCLUDES MAP OPERATIONS, OVERLAY OPERATIONS, TEMPLATE OPER-
ATIONS, DATABASE UTILITIES MANIPULATION, FILE AND USER UTIL-
ITIES WITH ANALYSTIC TOOLS TAILORED TO THE SUPPORTED SOURCE
OPERATIONS (SIGINT, IMINT, CI/HUMINT) ASSET MANAGEMENT, OFFICE
PRODUCT SUITE, COMMUNICATIONS/MESSAGE UTILITIES, AND SYSTEM
ADMINISTRATION. THE SS WORKSTATIONS INTERFACE WITH VARIOUS
ORGANIC SENSORS, EXTERNAL DATA SOURCES THROUGH THE JOINT
DEFENSE INTELLIGENCE SUPPORT SERVICES (JDISS) OVERSTANDARD
COMMUNICATIONS LINKS.
2. THE AS WORKSTATIONS INTERFACE, VIA STANDARD COMMUNICATION
LINKS, WITH THE SS WORKSTATIONS WITHIN THE ACE AND REMOTE WORK-
STATIONS (RWS) OUTSIDE THE ACE USED FOR COLLATERAL PROCESSING.
AS FUNCTIONALITY INCLUDES MAP OPERATIONS, OVERLAY OPERATIONS,
TEMPLATE OPERATIONS, DATABASE UTILITIES/MANIPULATION, NODE
OPERATIONS, HIGH CRITERIA/EVENT ALARM SETTING, FILE AND USER
UTILITIES SUPPORTED BY ANALYSTIC TOOLS, COLLECTION MANAGEMENT
OPERATIONS, COMMUNICATIONS/MESSAGE UTILITIES, OFFICE PRODUCT
SUITE, AND SYSTEM ADMINISTRATION.
C. EMPLOYMENT: ASSIGNED TO THE ACE COMMS SECT @ DIVISION
(LT/HVY/ABN/AASLT (OR DIGITIZED)) WITHIN THE ACE, BN HHOC.
UNITS CAN CONFIGUR THEIR WORKSTATIONS TO MEET MISSION NEEDS.
(WHEN NO ACE COMMS YET EXISTS, IT SHOULD BE ASSIGNED TO ACE HQ.
D. BASIS OF ISSUE: 1 PER MI BN (LT/HVY/ABN/AASLT OR DIGITIZED
DIV), ANALYSIS AND CONTROL ELEMENT (ACE)
E. POWER REQUIREMENTS: POWER SOURCE: IN GARRISON, WORKSTATIONS
UTILIZE COMMERCIAL POWER. WHEN DEPLOYED, THE ACE IS POWERED BY AN
AN/MJQ-10A/LIN P27819/(2 x 30KW GEN) POWER PLANT IN THE HEAVY
DIVISIONS OR 2 15KW GENERATORS/LIN G78374 IN THE LIGHT DIVISIONS.
POWER REQUIREMENT = 120/208 VAC (+6% TO -12%), 50/60 HZ
(+3% TO -3%), THREE PHASE TO THE M40 DISTRIBUTION BOX AND SINGLE
PHASE OUTPUT FROM THE DISTRIBUTION BOX TO THE INDIVIDUAL WORK-
STATIONS. UPS POWER INTERFACES 80-132 VAC (47-66 HZ), 166-264
VAC (47-66 HZ) AND 22-32 VDC.
F. TRANSPORTATION REQUIREMENTS: REQUIRES 2 HMMWV AND 2 5T.
DROP SIDE TRUCKS, ONE OF WHICH CARRIES THE H01912/SHOP SHELTER,
AND EACH OF WHICH PULLS ONE OF THE 2 TRAILER-MTD 30KW GEN WHICH
COMPRISE THE POWER PLANT/P27819. DIV ACE IS TRANSPORTABLE BY
C130, C141, C5, C17 FIXED WING AND CH-47 ROTARY AIRCRAFT, AND
RAIL.
G. OPERATOR/MAINTAINER PERSONNEL IMPACTS:
1. NO OPERATOR PERSONNEL PLUS-UPS AUTHORIZED FOR ASAS.
2. THE FOLLOWING ORGANIC ACE PERSONNEL WILL BE UTILIZED AS
OPERATORS:
-SIGNAL ANALYSIS TECH 352C
-ALL SOURCE INTELLIGENCE 35D
-SIGNALS INTELLIGENCE/ELECTRONIC WARFARE 35G
-INTELLIGENCE ANALYST 96B
-IMAGERY ANALYST 96D
-COUNTERINTELLIGENCE AGENT 97B
-SIGNALS INTELLIGENCE ANALYST 98C
-NONCOMMUNICATIONS INTERCEPTOR/ANALYST 98J
-ALL SOURCE INTELLIGENCE TECHNICIAN 350B0
-IMAGERY INTELLIGENCE TECHNICIAN 350DO
-COUNTER-INTELLIGENCE TECHNICIAN 351BO
-IGS OPERATOR 96H
-EW/INTCPT TACTICAL SYS RPR 33W
3. SSG/E6-MSG/E8 96B/INTEL SGT AND SSG/E6-MSG/E8
98C/SIGINT SGT IN ASAS-MANAGEMENT POSITIONS (I.E. THE SENIOR
POSN) WITHIN THE ACE HQ, ASI SECT HQ, AND SIGINT TM ARE
AUTHORIZED ASI 1F/ASAS MASTER OPERATIONS.
4. MAINTAINERS:
a. ELECTRONIC WARFARE/INTERCEPT TACTICAL SYSTEMS
REPAIRER MOS 33W (ORGANIC TO THE UNIT) IS REQ'D. NO
PLUS-UPS ARE AUTHORIZED.
b. 1 MOS 63B MAINTAINER PLUS-UP PER DIV ASAS (HVY
& LT) IS SHOWN IN THIS BOIP. IT IS MARC-DRIVEN AND
SUPPORTS THE VEHICLES WHICH HAVE BEEN ADDED IN BOTH
THIS BOIP AND M095AB/DIV CCS. THE BILLPAYERS ARE 2
98G/VOICE INTERCEPT POSNS FROM THE GS CO "6 EW TEAM"
PARA, HVY DIV ONLY (I.E. OPERATORS FOR GROUND BASED
COMMON SENSOR-HEAVY (GBCS-H)/BOIP M077AA).
6. MAINTENANCE CONCEPT:
a. THE STANDARD ARMY EQUIPMENT USED AS ASIOE WILL BE SUP-
PORTED USING ESTABLISHED ARMY SUPPLY AND MAINTENANCE PROCE-
DURES.
b. THE CHS-2 COMPONENTS WILL BE SUPPORTED USING THE SUPPLY
AND MAINTENANCE CONCEPT APPROVED FOR CHS-2 COMPONENTS. OPERATORS
WILL PERFORM FAULT ISOLATION DOWN TO LRU USING TECHNICAL MANUALS
AND DIAGNOSTIC SOFTWARE. MOS 33W WILL VERIFY SUSPECTED FAULTY
LRU'S, AND PERFORM REMOVE AND REPLACE ACTIONS AT THE UNIT LEVEL.
CHS-2 COMPONENTS ARE SUPPORTED BY CONTRACTOR WARRANTY (LIFE OF
CONTRACT, 1995-2005).
c. THE COMMERCIAL-OFF-THE-SHELF (COTS) COMPONENTS WILL BE
SUPPORTED USING MOS 33W AT THE UNIT AND DIRECT SUPPORT (DS)
LEVELS. BEYOND DIRECT SUPPORT, THE COMPONENTS WILL BE EVACUATED
TO THE DESIGNATED GOVERNMENT OR CONTRACTOR GENERAL SUPPORT (GS)
FACILILTY OR DEPOT FOR REPAIR. SPARES ARE TO BE REQUISITIONED
THROUGH THE SUPPLY SYSTEM AND DEPOT REPARABLE UNSERVICEABLES ARE
TO BE TURNED IN THROUGH THE SUPPLY SYSTEM FOR REPAIR.
d. POST DEPLOYMENT SOFTWARE SUPPORT WILL BE PROVIDED BY
CECOM SOFTWARE ENGINEERING CENTER (SEC).
H. SPECIAL NOTES:
1. THIS ITEM IS APPROPRIATE FOR INCLUSION IN FORCE MANAGEMENT
BULLETIN BOARD (FMBB) "ABOI" DATABASE (FORMERLY REFERRED TO AS
AR 71-13).
2. ASAS BLOCK I AND ASAS-EXTENDED (ASAS-E) HARDWARE, ALTHOUGH
NOT DOCUMENTED IN TOE, IS CURRENTLY DOCUMENTED IN MTOE AND
AUTHORIZED TO UNITS BASED ON MEMORANDUM OF AUTHORIZATION (MOA)
FROM HQDA (DAMO-FDI) DATED 191247Z MAR 93, SUBJECT: MI BASIS
OF ISSUE PLAN (BOIP) PRIORITIZATION AND DOCUMENTATION AND
THE FOLLOWING UPDATES:
a. MESSAGE, DAMO-FDI, DTG 0110835 MAY 95: SUBJECT: AMENDMENT
1 TO ASAS MOA.
b. MESSAGE, DAMO-FDI, DTG 241800Z JUN 96, SUBJECT: ASAS-E.
c. MESSAGE, DAMO-FDI, DTG 251708Z SEP 96, SUBJECT: UPDATE TO
AMENDMENT 1 TO THE ASAS MOA.
d. MESSAGE, DAMO-FDI, DTG 301728Z OCT 96, SUBJECT: AMENDMENT
2 TO THE ASAS MOA.
e. MESSAGE, DAMO-FDI, DTG 061834Z NOV 96, SUBJECT: CORRECTION
TO AMENDMENT 2 TO ASAS MOA.
f. MESSAGE, DAMO-FDI, DTG 181442Z DEC 96, SUBJECT: AMENDMENT
3 TO THE ASAS MOA.
3. ALTHOUGH ASAS BLOCK II IS THE FIRST ASAS EQUIPMENT DOC-
UMENTED IN TOE, ANY/ALL OF THE FOLLOWING BLOCK I OR ASAS-E EQUIP-
MENT WILL BE REPLACED, IN APPROPRIATELY FIELDED UNITS, UPON
FIELDING OF THIS BLOCK II DIV ACE W/14 WORKSTATIONS:
a. FROM UNITS WITH BLOCK I OR ASAS-E EQUIPMENT:
(1) NSN 7010-01-428-2291 WORKSTATION, COMPUTER GRAPHICS:
AN/TYQ-72(V)1, LIN NOT ASSIGNED (THE ALPHA RISC WORKSTATIONS
USED IN THE ALL SOURCE)
(2) NSN 5895-01-417-8441 WORKSTATION, COMPUTER GRAPHICS:
AN/TYQ-52(V)2/LIN Z98150 (THE CODAR WORKSTATIONS USED IN THE
SINGLE SOURCE)
(3) NSN 5895-01-374-1770 SUPPLEMENTARY EQUIPMENT, ELECTRONIC:
AN/TYQ-42(V)13/LIN S90427.
(4) NSN 5895-01-370-3670 SUPPLEMENTARY EQUIPMENT, ELECTRONIC:
AN/TYQ-42(V)14/LIN S60284.
(5) NSN 7010-01-428-2314 WORKSTATION, COMPUTER GRAPHICS:
AN/TYQ-74(V)1, LIN NOT ASSIGNED.
(6) NSN 7010-01-338-3296 WORKSTATION, COMPUTER GRAPHICS:
AN/TYQ-37(V)5, LIN W95329 (NOW OBSOLETE)
4. ALL SOURCE ANALYSIS SYSTEM (ASAS) IS A COMMAND, CONTROL,
AND COMMUNICATIONS SYSTEM CONSISTING OF COMMERCIAL-OFF-THE SHELF
(COTS) AND NON-DEVELOPMENTAL ITEMS OF EQUIPMENT AND SELECTED
ITEMS OF GOVERNMENT FURNISHED EQUIPMENT INTEGRATED TO MEET THE
REQUIREMENTS OF THE ORD. ASAS SUPPORTS THE WARFIGHTING COM-
MANDER'S BATTLE MANAGEMENT AND INFORMATION WARFARE PROCESS BY
RAPIDLY PROCESSING AND CORRELATING LARGE VOLUMES OF COMBAT INFOR-
MATION AND SENSOR REPORTS.
5. THE PURPOSE OF ASAS IS TO FUSE INTELLIGENCE FROM ALL SOURCES
INTO A COLLATERAL COMMON PICTURE OF THE BATTLEFIELD AND PROVIDE
TIMELY AND ACCURATE TARGETING INFORMATION, INTELLIGENCE PRODUCTS,
AND THREAT ALERTS. ASAS PROVIDES AUTOMATED INTELLIGENCE AND
INFORMATION MANAGEMENT, INCLUDING INTERFACE DATA HANDLING, TO
COUPLE INTELLIGENCE AND ELECTRONIC WARNING (IEW) SENSORS,
PREPROCESSORS, THE ASAS, AND THE ARMY BATTLE COMMAND SYSTEM (ABCS)
TO MEET TIME AND ACCURACY REQUIREMENTS FOR DECISION SUPPORT AND
INFORMATION WARFARE PLANNING AND EXECUTION.